Description
Tank Water Soaker – Absorbs Water
- Condensation occurs in all fuel storage tanks & causes contamination in the form of water that settles on the bottom of the tank.
- Lower the water soaker into the tank, attach using the 3m cord. (Ensure it’s sitting on the bottom of the tank).
- When water is fully absorbed the nylon bladder expands into the mesh containment tube.
- Check monthly. Both versions are 300mm long.
- WS2 (dia 56mm) absorbs 489ml, WS3 (dia 100mm) absorbs 1.59L.
Instructions for use:
- Select the correct size Water Soaker for your application (3 sizes available), deploy or retrieve the Water Soaker.
- Ensure there are no sources of ignition (e.g cigarettes and or other burning materials) near to the fuel tank before opening.
- Lower the Water Soaker into the fuel tank using the attached cord until the bottom of the tank is reached (the cord will go slack) – as water is more dense than fuel this is where the water will have settled – allow the Water Soaker to lie flat on the bottom of the tank.
- Ensure that the end of the cord is available to retrieve the Water Soaker when it is full (we recommend that you attach it to the underside of the fuel cap).
- Check your Water Soaker monthly and replace every 3 months (when the Water Soaker has absorbed fully you will find that the nylon bladder has fully expanded into the mesh filter containment tube).
- Ensure that the Water Soaker does not obstruct any sender units in the tank or the fuel outlet (very important in moving vehicles).
- Dispose of the Water Soaker in accordance with local regulations
